| File information: | |
| File name: | Gallien_krueger_800RB_SM1.pdf [preview Gallien krueger 800RB SM1] |
| Size: | 5044 kB |
| Extension: | |
| Mfg: | GALLIEN-KRUEGER |
| Model: | Gallien krueger 800RB SM1 🔎 |
| Original: | Gallien krueger 800RB SM1 🔎 |
| Descr: | GALLIEN-KRUEGER 800RB Gallien_krueger_800RB_SM1.pdf |
| Group: | Electronics > Other |
| Uploaded: | 22-03-2020 |
| User: | Anonymous |
| Multipart: | No multipart |
| Information about the files in archive: | ||
| Decompress result: | OK | |
| Extracted files: | 1 | |
File name Gallien_krueger_800RB_SM1.pdf Service Manual 800RB Table of Contents Operating Instructions 3 Turn On / Calibration Procedure 6 Schematics 11 Engineering Change Orders (ECOs) 24 Bill of Materials 34 800RB T/O Procedure GK Doc. # 420-0045-C Board #'s: 206-0045-C (preamp), 206-0044-A (power amp), 206-0048-A (power supply). 800RB- all options 8/19/91 Setup 1) Variac on 0, power switch off- connect power cord. 2) Connect outputs to load box (100W-> load A, 300W-> load B). 3) Resistance loads open (switch in center). 4) Speaker on (connected to 100W output). 5) Load box to scope-B and AC- VM. 6) Set scope switch on load box to look at load A (down). 7) Set oscillator on 200 Hz sine wave @ 5mVrms (-46dBV). 8) DVM on 20mV (dc) range. 9) Scope | ||

| Date | User | Rating | Comment |